Database - Codes, Regulations & Standards

Glossary

Search which Codes, Regulations or Standards may apply to your products

Application Domain

Application Sector

BS EN 16989:2018
Railway applications. Fire protection on railway vehicles. Fire behaviour test for a complete seat.

BS EN 17064:2018
Safety requirements for cableway installations designed to carry persons. Prevention and fight against fire.

BS EN ISO 17074:2011
Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame.

BS EN 17077:2018
Determination of burning behaviour of dust layers.

BS EN 17084:2019
Railway applications. Fire protection in railway vehicles. Toxicity test of materials and components.

BS EN ISO 1716:2018
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value).

BS ISO 17554:2015
Reaction to fire tests. Mass loss measurement.

BS EN ISO 17881-1:2016
Textiles. Determination of certain flame retardants. Brominated flame retardants

BS EN ISO 17881-2:2016
Textiles. Determination of certain flame retardants. Phosphorus flame retardants

BS EN 1794-3:2016
Road traffic noise reducing devices. Non-acoustic performance. Reaction to fire. Burning behaviour of noise reducing devices and classification

BS 1892-3:2003
Gymnasium equipment. Sports mats. Specification for fire safety requirements for mats, mattresses and landing areas

BS ISO 19281:2016
Air cargo. Fire resistant containers. Design, performance and testing requirements.

BS ISO 19700:2013
Controlled equivalence ratio method for the determination of hazardous components of fire effluents. The steady state tube furnace.

BS ISO 19701:2013
Methods for sampling and analysis of fire effluents

BS ISO 19703:2018
Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires.

BS ISO 19706:2012
Guidelines for assessing the fire threat to people.

BS EN 1991-1-2 NA:2008
UK National Annex to Eurocode 1. Actions on structures. Traffic loads on bridges

BS EN 1991-1-2:2002
Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

BS EN 1992-1-2 NA:2005
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design - National Annex - Nationally determined parameters

BS EN 1992-1-2:2005
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design

BS EN 1993-1-2:2005
Eurocode 3. Design of steel structures. General rules. Structural fire design

BS EN 1993-1-2 NA:2008
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design

BS EN 1994-1-2 NA:2008
UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules

BS EN 1994-1-2+A1:2014
Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design

BS EN 1995-1-2 NA:2006
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design - National specifications

BS EN 1995-1-2:2004
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design

BS EN 1996-1-2 NA:2014
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design - National Annex

BS EN 1996-1-2:2005
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design

BS EN 1999-1-2:2007
Eurocode 9. Design of aluminium structures. Structural fire design

BS EN 1999-1-2 NA:2009
UK National Annex to Eurocode 9. Design of aluminium structures. Structural fire design

BS EN 2:1992
Classification of fires

BS ISO 21925-1:2018
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers

BS EN 2234:2018
Aerospace series - Cable, electrical, fire resistant - Technical specification

BS EN 2310:1991
Aerospace series. Test methods for flame resistance rating of non-metallic materials.

BS ISO 23932:2011
Fire safety engineering. General principles .

BS ISO 23935:2008
Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones.

BS ISO 24678-6:2016
Fire safety engineering. Requirements governing algebraic formulae. Flashover related phenomena

BS ISO 24679-1:2017
Fire safety engineering -- Performance of structures in fire -- Part 1: General

BS EN ISO 25762:2012
Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)

BS EN 2591-100:2012
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

BS EN 2591-326:2013
Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment.

BS EN 2591-6317:2002
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability

BS EN 2591-318:1998
Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance

BS EN 2591-6318:2002
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance

BS ISO 26367-1:2011
Guidelines for assessing the adverse environmental impact of fire effluents. General

BS ISO 26367-2:2017
Guidelines for assessing the adverse environmental impact of fire effluents -- Part 2: Methodology for compiling data on environmentally significant emissions from fires

BS ISO 2685:2015
Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones

BS ISO 27368:2008
Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide

BS EN 2824:2011
Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media.

BS EN 2825:2011
Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density.

BS EN 2826:2011
Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke.

BS ISO 29473:2012
Fire tests. Uncertainty of measurements in fire tests.

BS ISO 29903:2012
Guidance for comparison of toxic gas data between different physical fire models and scales

BS 2G 239:1992
Specification for primary active lithium batteries for use in aircraft.

BS ISO 30021:2013
Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

BS EN ISO 340:2013
Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method

BS 3475-417:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness

BS EN 3475-601:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density

BS EN 3475-602:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity

BS EN 3475-100:2010
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General

BS EN 3475-407:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability

BS EN 3475-408:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance

BS EN 3475-408:2016
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance

BS EN ISO 3582:2001
Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame.

BS ISO 3795:1992
Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry.

BS EN 3844-3:2019
Aerospace series. Flammability of non metallic materials. Small burner test, 45°. Determination of the resistance of material to flame and glow propagation and to flame penetration

BS EN 3844-2:2019
Aerospace series. Flammability of non metallic materials. Small burner test, horizontal. Determination of the horizontal flame propagation

BS EN 3844-1:2019
Aerospace series. Flammability of non metallic materials. Small burner test, vertical. Determination of the vertical flame propagation

BS ISO 3917:2016
Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering.

BS EN 45545-2+A1:2015
Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components

BS EN 45545-1:2013
Railway applications. Fire protection on railway vehicles. General

BS EN 45545-6:2013
Railway applications. Fire protection on railway vehicles. Fire control and management systems

BS EN 45545-5+A1:2015
Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles

BS EN 45545-7:2013
Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations

BS EN 45545-3:2013
Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers

BS EN 45545-4:2013
Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design

BS 4569:1983
Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface.

BS EN ISO 4589-2:2017
Plastics. Determination of burning behaviour by oxygen index. Part 2. Ambient-temperature test.

BS EN ISO 4589-3:2017
Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test

BS EN ISO 4589-1:2017
Plastics. Determination of burning behaviour by oxygen index. Guidance

BS EN 469:2015
Protective clothing for firefighters. Performance requirements for protective clothing for firefighting.

BS 476-31.1:1983
Fire tests on building materials and structures. Methods for measuring smoke penetration through doorsets and shutter assemblies. Method of measurement under ambient temperature conditions.

BS 476-24:1987
Fire tests on building materials and structures. Method for determination of the fire resistance of ventilation ducts.

BS 476-23:1987
Fire tests on building materials and structures. Methods for determination of the contribution of components to the fire resistance of a structure.

BS 476-22:1987
Fire tests on building materials and structures. Method for determination of the fire resistance of non-loadbearing elements of construction.

BS 476-21:1987
Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction.

BS 476-13:1987
Fire tests on building materials and structures. Method of measuring the ignitability of products subjected to thermal irradiance.

BS 476-11:1982
Fire tests on building materials and structures. Method for assessing the heat emission from building materials.

BS 476-4:1970
Fire tests on building materials and structures. Non-combustibility test for materials.

BS 476-7:1997
Fire tests on building materials and structures. Method of test to determine the classification of the surface spread of flame of products

BS 476-33:1993
Fire tests on building materials and structures. Full-scale room test for surface products

BS 476-6:1989
Fire tests on building materials and structures. Method of test for fire propagation for products

BS 476-6/A1:2009
Fire tests on building materials and structures. Method of test for fire propagation for products.

BS 476-32:1989
Fire tests on building materials and structures. Guide to full scale fire tests within buildings

BS 476-12:1991
Fire tests on building materials and structures. Method of test for ignitability of products by direct flame impingement

BS 476-20:1987
Fire tests on building materials and structures. Method for determination of the fire resistance of elements of construction (general principles)

BS 476-3:2004
Fire tests on building materials and structures, Classification and method of test for external fire exposure to roofs

BS 476-10:2009
Guide to the principles, selection, role and application of fire testing and their outputs

BS 4790:1987
Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)

BS 4840-2:1994
Rigid polyurethane (PUR) foam in slab form. Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores

Need More Info ? Please Contact us

Glossary

Database - Codes, Regulations & Standards

BS EN 16989:2018Railway applications. Fire protection on railway vehicles. Fire behaviour test for a complete seat.

BS EN 17064:2018Safety requirements for cableway installations designed to carry persons. Prevention and fight against fire.

BS EN ISO 17074:2011Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame.

BS EN 17077:2018Determination of burning behaviour of dust layers.

BS EN 17084:2019Railway applications. Fire protection in railway vehicles. Toxicity test of materials and components.

BS EN ISO 1716:2018Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value).

BS ISO 17554:2015Reaction to fire tests. Mass loss measurement.

BS EN ISO 17881-1:2016Textiles. Determination of certain flame retardants. Brominated flame retardants

BS EN ISO 17881-2:2016Textiles. Determination of certain flame retardants. Phosphorus flame retardants

BS EN 1794-3:2016Road traffic noise reducing devices. Non-acoustic performance. Reaction to fire. Burning behaviour of noise reducing devices and classification

BS 1892-3:2003Gymnasium equipment. Sports mats. Specification for fire safety requirements for mats, mattresses and landing areas

BS ISO 19281:2016Air cargo. Fire resistant containers. Design, performance and testing requirements.

BS ISO 19700:2013Controlled equivalence ratio method for the determination of hazardous components of fire effluents. The steady state tube furnace.

BS ISO 19701:2013Methods for sampling and analysis of fire effluents

BS ISO 19703:2018Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires.

BS ISO 19706:2012Guidelines for assessing the fire threat to people.

BS EN 1991-1-2 NA:2008UK National Annex to Eurocode 1. Actions on structures. Traffic loads on bridges

BS EN 1991-1-2:2002Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

BS EN 1992-1-2 NA:2005Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design - National Annex - Nationally determined parameters

BS EN 1992-1-2:2005Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design

BS EN 1993-1-2:2005Eurocode 3. Design of steel structures. General rules. Structural fire design

BS EN 1993-1-2 NA:2008National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design

BS EN 1994-1-2 NA:2008UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules

BS EN 1994-1-2+A1:2014 Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design

BS EN 1995-1-2 NA:2006Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design - National specifications

BS EN 1995-1-2:2004Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design

BS EN 1996-1-2 NA:2014Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design - National Annex

BS EN 1996-1-2:2005Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design

BS EN 1999-1-2:2007Eurocode 9. Design of aluminium structures. Structural fire design

BS EN 1999-1-2 NA:2009UK National Annex to Eurocode 9. Design of aluminium structures. Structural fire design

BS EN 2:1992Classification of fires

BS ISO 21925-1:2018Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers

BS EN 2234:2018Aerospace series - Cable, electrical, fire resistant - Technical specification

BS EN 2310:1991Aerospace series. Test methods for flame resistance rating of non-metallic materials.

BS ISO 23932:2011Fire safety engineering. General principles .

BS ISO 23935:2008Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones.

BS ISO 24678-6:2016Fire safety engineering. Requirements governing algebraic formulae. Flashover related phenomena

BS ISO 24679-1:2017Fire safety engineering -- Performance of structures in fire -- Part 1: General

BS EN ISO 25762:2012Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)

BS EN 2591-100:2012Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

BS EN 2591-326:2013Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment.

BS EN 2591-6317:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability

BS EN 2591-318:1998Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance

BS EN 2591-6318:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance

BS ISO 26367-1:2011Guidelines for assessing the adverse environmental impact of fire effluents. General

BS ISO 26367-2:2017Guidelines for assessing the adverse environmental impact of fire effluents -- Part 2: Methodology for compiling data on environmentally significant emissions from fires

BS ISO 2685:2015Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones

BS ISO 27368:2008Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide

BS EN 2824:2011Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media.

BS EN 2825:2011Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density.

BS EN 2826:2011Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke.

BS ISO 29473:2012Fire tests. Uncertainty of measurements in fire tests.

BS ISO 29903:2012Guidance for comparison of toxic gas data between different physical fire models and scales

BS 2G 239:1992Specification for primary active lithium batteries for use in aircraft.

BS ISO 30021:2013Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

BS EN ISO 340:2013Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method

BS 3475-417:2009Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness

BS EN 3475-601:2008Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density

BS EN 3475-602:2008Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity

BS EN 3475-100:2010Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General

BS EN 3475-407:2009Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability

BS EN 3475-408:2006Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance

BS EN 3475-408:2016Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance

BS EN ISO 3582:2001Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame.

BS ISO 3795:1992Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry.

BS EN 3844-3:2019Aerospace series. Flammability of non metallic materials. Small burner test, 45°. Determination of the resistance of material to flame and glow propagation and to flame penetration

BS EN 3844-2:2019Aerospace series. Flammability of non metallic materials. Small burner test, horizontal. Determination of the horizontal flame propagation

BS EN 3844-1:2019Aerospace series. Flammability of non metallic materials. Small burner test, vertical. Determination of the vertical flame propagation

BS ISO 3917:2016Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering.

BS EN 45545-2+A1:2015Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components

BS EN 45545-1:2013Railway applications. Fire protection on railway vehicles. General

BS EN 45545-6:2013Railway applications. Fire protection on railway vehicles. Fire control and management systems

BS EN 45545-5+A1:2015Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles

BS EN 45545-7:2013Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations

BS EN 45545-3:2013Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers

BS EN 45545-4:2013Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design

BS 4569:1983Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface.

BS EN ISO 4589-2:2017Plastics. Determination of burning behaviour by oxygen index. Part 2. Ambient-temperature test.

BS EN ISO 4589-3:2017Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test

BS EN 16989:2018
Railway applications. Fire protection on railway vehicles. Fire behaviour test for a complete seat.

BS EN 17064:2018
Safety requirements for cableway installations designed to carry persons. Prevention and fight against fire.

BS EN ISO 17074:2011
Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame.

BS EN 17077:2018
Determination of burning behaviour of dust layers.

BS EN 17084:2019
Railway applications. Fire protection in railway vehicles. Toxicity test of materials and components.

BS EN ISO 1716:2018
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value).

BS ISO 17554:2015
Reaction to fire tests. Mass loss measurement.

BS EN ISO 17881-1:2016
Textiles. Determination of certain flame retardants. Brominated flame retardants

BS EN ISO 17881-2:2016
Textiles. Determination of certain flame retardants. Phosphorus flame retardants

BS EN 1794-3:2016
Road traffic noise reducing devices. Non-acoustic performance. Reaction to fire. Burning behaviour of noise reducing devices and classification

BS 1892-3:2003
Gymnasium equipment. Sports mats. Specification for fire safety requirements for mats, mattresses and landing areas

BS ISO 19281:2016
Air cargo. Fire resistant containers. Design, performance and testing requirements.

BS ISO 19700:2013
Controlled equivalence ratio method for the determination of hazardous components of fire effluents. The steady state tube furnace.

BS ISO 19701:2013
Methods for sampling and analysis of fire effluents

BS ISO 19703:2018
Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires.

BS ISO 19706:2012
Guidelines for assessing the fire threat to people.

BS EN 1991-1-2 NA:2008
UK National Annex to Eurocode 1. Actions on structures. Traffic loads on bridges

BS EN 1991-1-2:2002
Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

BS EN 1992-1-2 NA:2005
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design - National Annex - Nationally determined parameters

BS EN 1992-1-2:2005
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design

BS EN 1993-1-2:2005
Eurocode 3. Design of steel structures. General rules. Structural fire design

BS EN 1993-1-2 NA:2008
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design

BS EN 1994-1-2 NA:2008
UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules

BS EN 1994-1-2+A1:2014
Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design

BS EN 1995-1-2 NA:2006
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design - National specifications

BS EN 1995-1-2:2004
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design

BS EN 1996-1-2 NA:2014
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design - National Annex

BS EN 1996-1-2:2005
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design

BS EN 1999-1-2:2007
Eurocode 9. Design of aluminium structures. Structural fire design

BS EN 1999-1-2 NA:2009
UK National Annex to Eurocode 9. Design of aluminium structures. Structural fire design

BS EN 2:1992
Classification of fires

BS ISO 21925-1:2018
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers

BS EN 2234:2018
Aerospace series - Cable, electrical, fire resistant - Technical specification

BS EN 2310:1991
Aerospace series. Test methods for flame resistance rating of non-metallic materials.

BS ISO 23932:2011
Fire safety engineering. General principles .

BS ISO 23935:2008
Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones.

BS ISO 24678-6:2016
Fire safety engineering. Requirements governing algebraic formulae. Flashover related phenomena

BS ISO 24679-1:2017
Fire safety engineering -- Performance of structures in fire -- Part 1: General

BS EN ISO 25762:2012
Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)

BS EN 2591-100:2012
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

BS EN 2591-326:2013
Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment.

BS EN 2591-6317:2002
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability

BS EN 2591-318:1998
Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance

BS EN 2591-6318:2002
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance

BS ISO 26367-1:2011
Guidelines for assessing the adverse environmental impact of fire effluents. General

BS ISO 26367-2:2017
Guidelines for assessing the adverse environmental impact of fire effluents -- Part 2: Methodology for compiling data on environmentally significant emissions from fires

BS ISO 2685:2015
Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones

BS ISO 27368:2008
Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide

BS EN 2824:2011
Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media.

BS EN 2825:2011
Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density.

BS EN 2826:2011
Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke.

BS ISO 29473:2012
Fire tests. Uncertainty of measurements in fire tests.

BS ISO 29903:2012
Guidance for comparison of toxic gas data between different physical fire models and scales

BS 2G 239:1992
Specification for primary active lithium batteries for use in aircraft.

BS ISO 30021:2013
Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

BS EN ISO 340:2013
Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method

BS 3475-417:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness

BS EN 3475-601:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density

BS EN 3475-602:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity

BS EN 3475-100:2010
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General

BS EN 3475-407:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability

BS EN 3475-408:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance

BS EN 3475-408:2016
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance

BS EN ISO 3582:2001
Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame.

BS ISO 3795:1992
Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry.

BS EN 3844-3:2019
Aerospace series. Flammability of non metallic materials. Small burner test, 45°. Determination of the resistance of material to flame and glow propagation and to flame penetration

BS EN 3844-2:2019
Aerospace series. Flammability of non metallic materials. Small burner test, horizontal. Determination of the horizontal flame propagation

BS EN 3844-1:2019
Aerospace series. Flammability of non metallic materials. Small burner test, vertical. Determination of the vertical flame propagation

BS ISO 3917:2016
Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering.

BS EN 45545-2+A1:2015
Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components

BS EN 45545-1:2013
Railway applications. Fire protection on railway vehicles. General

BS EN 45545-6:2013
Railway applications. Fire protection on railway vehicles. Fire control and management systems

BS EN 45545-5+A1:2015
Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles

BS EN 45545-7:2013
Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations

BS EN 45545-3:2013
Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers

BS EN 45545-4:2013
Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design

BS 4569:1983
Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface.

BS EN ISO 4589-2:2017
Plastics. Determination of burning behaviour by oxygen index. Part 2. Ambient-temperature test.

BS EN ISO 4589-3:2017
Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test

BS EN ISO 4589-1:2017
Plastics. Determination of burning behaviour by oxygen index. Guidance