Database - Codes, Regulations & Standards

Glossary

Search which Codes, Regulations or Standards may apply to your products

Application Domain

Application Sector

- SP7:2016
National Building Code of India 2016 (Vol I and II)

ABD 00031:1996
Airbus Industrie. Airbus Directives (ABD) and Procedures. Fireworthiness Requirements - Pressurized Section of Fuselage (Former ATS-1000.001 of November 1989)

ABNT NBR EN ISO 13506:2016
Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin

ABNT NBR 16405:2015
Sofas, armchairs and upholstered seats - Assessment of the ignitability properties - Classifications and method of test

ABNT NBR ISO 3795:2014
Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials

ABNT NBR IEC 60065:2009
Audio, video and similar electronic apparatus - Safety requirements

ABNT NBR EN 60332-1-1+A1:2005
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

ABNT NBR IEC 60695-2-11:2016
Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT) ERATTA

ABNT NBR IEC 60695-2-11:2016
Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT)

ABNT NBR IEC 60695-2-10:2015
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

ABNT NBR IEC 60695-2-12:2013
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials

ABNT NBR 60695-11-5:2006
Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

ABNT NBR EN 60695-10-2:2008
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

ABNT NBR IEC 60695-2-13:2013
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials

AITM 2.0007 A&B:1996
Airbus Industrie Test Methods (AITM) Determination of the Specific Optical Smoke Density of Aircraft Interior Materials

AITM 2.0006:1996
Airbus Industrie Test Methods (AITM) Determination of Heat Release Rate of Aircraft Materials

AITM 2.0003:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, Horizontal

AITM 2.0004:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, 45°

AITM 2.0005:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, 60°

AITM 2.0009:1996
Airbus Industrie Test Methods (AITM) Fire Resistance of Aircraft Seat Cushion Utilizing a High Intensity Open Flame

AITM 2.0002 A&B:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, Vertical

AITM 2.0008:1996
Airbus Industrie Test Methods (AITM) Determination of the Specific Optical Smoke Density of Electrical Wire/Cable Insulation

AITM 2.0010:1996
Airbus Industrie Test Methods (AITM) Fire Resistance of Aircraft Cargo Compartment Lining Materials Utilizing a High Intensity Open Flame

AITM 2.0056:1996
Airbus Industrie Test Methods (AITM) Determination of burn through resistance characteristics of thermal / acoustic insulation materials

AITM 3.0005:1996
Airbus Industrie Test Methods (AITM) Determination of Specific Gas Components of Smoke Generated by Aircraft Interior Materials

ASD-STAN prEN 2591-326:2017
Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment.

ASD-STAN prEN 2591-318:2017
Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance

ASD-STAN prEN 2591-100:2016
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

ASD-STAN prEN 4708-107:2018
Aerospace series-Sleeving, heat-shrinkable, for binding, insulation and identification-Part 107: Polytetrafluoroethylene (PTFE)-Operating temperatures ‒ 65 °C to 260 °C-Product standard

ASD-STAN prEN 4708-108:2018
Aerospace series-Sleeving, heat-shrinkable, for binding, insulation and identification-Part 108: Limited fire hazard sleeving-Operating temperatures ‒ 65 °C to 150 °C-Product standard

ASTM C1166-06(2016):2016
Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

ASTM D1230-17:2017
Standard Test Method for Flammability of Apparel Textiles

ASTM D1929-20:2020
Standard Test Method for Determining Ignition Temperature of Plastics

ASTM D2859 - 16:2016
Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

ASTM D3675-19:2019
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

ASTM D3801-20:2020
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

ASTM D3806-19a:2019
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

ASTM D3874-20:2020
Standard Test Method for Ignition of Materials by Hot Wire Sources

ASTM D4151-18:2018
Standard Test Method for Flammability of Blankets

ASTM D4391-18a:2018
Standard Terminology Relating to The Burning Behavior of Textiles

ASTM D4804-20:2020
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

ASTM D4986-20:2020
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

ASTM D5048-20:2020
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

ASTM D5132-20:2020
Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles

ASTM D5424-18:2018
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D5425-18:2018
Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

ASTM D5537-18:2018
Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D5664-17:2017
Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

ASTM D6113- 16:2016
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

ASTM D6194-18:2018
Standard Test Method for Glow-Wire Ignition of Materials

Need More Info ? Please Contact us

Glossary

Database - Codes, Regulations & Standards

- SP7:2016National Building Code of India 2016 (Vol I and II)

ABD 00031:1996Airbus Industrie. Airbus Directives (ABD) and Procedures. Fireworthiness Requirements - Pressurized Section of Fuselage (Former ATS-1000.001 of November 1989)

ABNT NBR EN ISO 13506:2016 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin

ABNT NBR 16405:2015Sofas, armchairs and upholstered seats - Assessment of the ignitability properties - Classifications and method of test

ABNT NBR ISO 3795:2014Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials

ABNT NBR IEC 60065:2009 Audio, video and similar electronic apparatus - Safety requirements

ABNT NBR EN 60332-1-1+A1:2005Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

ABNT NBR IEC 60695-2-11:2016Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT) ERATTA

ABNT NBR IEC 60695-2-11:2016Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT)

ABNT NBR IEC 60695-2-10:2015Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

ABNT NBR IEC 60695-2-12:2013Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials

ABNT NBR 60695-11-5:2006 Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

ABNT NBR EN 60695-10-2:2008Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

ABNT NBR IEC 60695-2-13:2013Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials

AITM 2.0007 A&B:1996Airbus Industrie Test Methods (AITM) Determination of the Specific Optical Smoke Density of Aircraft Interior Materials

AITM 2.0006:1996Airbus Industrie Test Methods (AITM) Determination of Heat Release Rate of Aircraft Materials

AITM 2.0003:1996Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, Horizontal

AITM 2.0004:1996Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, 45°

AITM 2.0005:1996Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, 60°

AITM 2.0009:1996Airbus Industrie Test Methods (AITM) Fire Resistance of Aircraft Seat Cushion Utilizing a High Intensity Open Flame

AITM 2.0002 A&B:1996Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, Vertical

AITM 2.0008:1996Airbus Industrie Test Methods (AITM) Determination of the Specific Optical Smoke Density of Electrical Wire/Cable Insulation

AITM 2.0010:1996Airbus Industrie Test Methods (AITM) Fire Resistance of Aircraft Cargo Compartment Lining Materials Utilizing a High Intensity Open Flame

AITM 2.0056:1996Airbus Industrie Test Methods (AITM) Determination of burn through resistance characteristics of thermal / acoustic insulation materials

AITM 3.0005:1996Airbus Industrie Test Methods (AITM) Determination of Specific Gas Components of Smoke Generated by Aircraft Interior Materials

ASD-STAN prEN 2591-326:2017Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment.

ASD-STAN prEN 2591-318:2017Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance

ASD-STAN prEN 2591-100:2016Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

ASD-STAN prEN 4708-107:2018Aerospace series-Sleeving, heat-shrinkable, for binding, insulation and identification-Part 107: Polytetrafluoroethylene (PTFE)-Operating temperatures ‒ 65 °C to 260 °C-Product standard

ASD-STAN prEN 4708-108:2018Aerospace series-Sleeving, heat-shrinkable, for binding, insulation and identification-Part 108: Limited fire hazard sleeving-Operating temperatures ‒ 65 °C to 150 °C-Product standard

ASTM C1166-06(2016):2016Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

ASTM D1230-17:2017Standard Test Method for Flammability of Apparel Textiles

ASTM D1929-20:2020Standard Test Method for Determining Ignition Temperature of Plastics

ASTM D2859 - 16:2016Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

ASTM D3675-19:2019Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

ASTM D3801-20:2020Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

ASTM D3806-19a:2019Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

ASTM D3874-20:2020Standard Test Method for Ignition of Materials by Hot Wire Sources

ASTM D4151-18:2018Standard Test Method for Flammability of Blankets

ASTM D4391-18a:2018Standard Terminology Relating to The Burning Behavior of Textiles

ASTM D4804-20:2020Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

ASTM D4986-20:2020Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

ASTM D5048-20:2020Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

ASTM D5132-20:2020Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles

ASTM D5424-18:2018Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D5425-18:2018Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

ASTM D5537-18:2018Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D5664-17:2017Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

ASTM D6113- 16:2016Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

ASTM D6194-18:2018Standard Test Method for Glow-Wire Ignition of Materials

- SP7:2016
National Building Code of India 2016 (Vol I and II)

ABD 00031:1996
Airbus Industrie. Airbus Directives (ABD) and Procedures. Fireworthiness Requirements - Pressurized Section of Fuselage (Former ATS-1000.001 of November 1989)

ABNT NBR EN ISO 13506:2016
Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin

ABNT NBR 16405:2015
Sofas, armchairs and upholstered seats - Assessment of the ignitability properties - Classifications and method of test

ABNT NBR ISO 3795:2014
Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials

ABNT NBR IEC 60065:2009
Audio, video and similar electronic apparatus - Safety requirements

ABNT NBR EN 60332-1-1+A1:2005
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

ABNT NBR IEC 60695-2-11:2016
Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT) ERATTA

ABNT NBR IEC 60695-2-11:2016
Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT)

ABNT NBR IEC 60695-2-10:2015
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

ABNT NBR IEC 60695-2-12:2013
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials

ABNT NBR 60695-11-5:2006
Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

ABNT NBR EN 60695-10-2:2008
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

ABNT NBR IEC 60695-2-13:2013
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials

AITM 2.0007 A&B:1996
Airbus Industrie Test Methods (AITM) Determination of the Specific Optical Smoke Density of Aircraft Interior Materials

AITM 2.0006:1996
Airbus Industrie Test Methods (AITM) Determination of Heat Release Rate of Aircraft Materials

AITM 2.0003:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, Horizontal

AITM 2.0004:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, 45°

AITM 2.0005:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, 60°

AITM 2.0009:1996
Airbus Industrie Test Methods (AITM) Fire Resistance of Aircraft Seat Cushion Utilizing a High Intensity Open Flame

AITM 2.0002 A&B:1996
Airbus Industrie Test Methods (AITM) Flammability of non-metallic products - Small Burner Test, Vertical

AITM 2.0008:1996
Airbus Industrie Test Methods (AITM) Determination of the Specific Optical Smoke Density of Electrical Wire/Cable Insulation

AITM 2.0010:1996
Airbus Industrie Test Methods (AITM) Fire Resistance of Aircraft Cargo Compartment Lining Materials Utilizing a High Intensity Open Flame

AITM 2.0056:1996
Airbus Industrie Test Methods (AITM) Determination of burn through resistance characteristics of thermal / acoustic insulation materials

AITM 3.0005:1996
Airbus Industrie Test Methods (AITM) Determination of Specific Gas Components of Smoke Generated by Aircraft Interior Materials

ASD-STAN prEN 2591-326:2017
Aerospace series. Elements of electrical and optical connection. Test methods. Part 326. Fuel fire immersion and containment.

ASD-STAN prEN 2591-318:2017
Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance

ASD-STAN prEN 2591-100:2016
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

ASD-STAN prEN 4708-107:2018
Aerospace series-Sleeving, heat-shrinkable, for binding, insulation and identification-Part 107: Polytetrafluoroethylene (PTFE)-Operating temperatures ‒ 65 °C to 260 °C-Product standard

ASD-STAN prEN 4708-108:2018
Aerospace series-Sleeving, heat-shrinkable, for binding, insulation and identification-Part 108: Limited fire hazard sleeving-Operating temperatures ‒ 65 °C to 150 °C-Product standard

ASTM C1166-06(2016):2016
Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

ASTM D1230-17:2017
Standard Test Method for Flammability of Apparel Textiles

ASTM D1929-20:2020
Standard Test Method for Determining Ignition Temperature of Plastics

ASTM D2859 - 16:2016
Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

ASTM D3675-19:2019
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

ASTM D3801-20:2020
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

ASTM D3806-19a:2019
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

ASTM D3874-20:2020
Standard Test Method for Ignition of Materials by Hot Wire Sources

ASTM D4151-18:2018
Standard Test Method for Flammability of Blankets

ASTM D4391-18a:2018
Standard Terminology Relating to The Burning Behavior of Textiles

ASTM D4804-20:2020
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

ASTM D4986-20:2020
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

ASTM D5048-20:2020
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

ASTM D5132-20:2020
Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles

ASTM D5424-18:2018
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D5425-18:2018
Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

ASTM D5537-18:2018
Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D5664-17:2017
Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

ASTM D6113- 16:2016
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

ASTM D6194-18:2018
Standard Test Method for Glow-Wire Ignition of Materials