Database - Codes, Regulations & Standards

Glossary

Search which Codes, Regulations or Standards may apply to your products

Application Domain

Application Sector

ASTM E662 -19:2019
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

ASTM E800 - 14:2014
Standard Guide for Measurement of Gases Present or Generated During Fires

ASTM E84 - 20:2020
Standard Test Method for Surface Burning Characteristics of Building Materials

ASTM E906 / E906M - 17:2017
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

ASTM E970 - 17:2017
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ASTM F1534-16:2016
Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

ASTM F1550-16:2016
Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter

ATIS 0600307:2014
Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies, Ancillary Non-Metallic Apparatus, and Fire Spread Requirements for Wire and Cable

ATIS 0600319:2014
Equipment Assemblies - Fire Propagation Risk Assessment Criteria

BDS EN ISO 10093:2003
Plastics. Fire tests. Standard ignition sources.

BDS EN 1021-2:2014
Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent

BDS EN 1021-1:2014
Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette

BDS EN ISO 1043-4:1999/A1:2016
Plastics. Symbols and abbreviated terms. Flame retardants

BDS EN ISO 10528:1998
Textiles -- Commercial laundering procedure for textile fabrics prior to flammability testing

BDS EN 1101:1998
Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame).

BDS EN 1101:1998/A1:2006
Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame).

BDS EN 1102:2016
Textiles and textile products. Burning behavior. Curtains and drapes. Detailed procedure to determine the flame spread of vertically oriented specimens.

BDS EN 1103:2006
Textiles. Fabrics for apparel. Detailed procedure to determine the burning behaviour.

BDS EN ISO 1182:2011
Reaction to fire tests for products - Non-combustibility test

BDS EN ISO 11925-2:2011
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test.

BDS EN 12101-1:2006
Smoke and heat control systems. Specification for smoke barriers

BDS EN 12101-1:2006/A1:2006
Smoke and heat control systems. Specification for smoke barriers

BDS EN ISO 12138:2018
Textiles -- Domestic laundering procedures for textile fabrics prior to flammability testing

BDS EN 12881-2:2005+A1:2009
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

BDS EN 12881-1:2014
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

BDS EN 12882:2015
Conveyor belts for general purpose use. Electrical and flammability safety requirements.

BDS EN 12952-1:2015
Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a smouldering cigarette

BDS EN ISO 12952-2:2010
Textiles -- Assessment of the ignitability of bedding items -- Part 2: Ignition source: match-flame equivalent

BDS EN ISO 12952-1:2010
Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette

Need More Info ? Please Contact us

Glossary

Database - Codes, Regulations & Standards

ASTM E662 -19:2019Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

ASTM E800 - 14:2014Standard Guide for Measurement of Gases Present or Generated During Fires

ASTM E84 - 20:2020Standard Test Method for Surface Burning Characteristics of Building Materials

ASTM E906 / E906M - 17:2017Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

ASTM E970 - 17:2017Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ASTM F1534-16:2016Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

ASTM F1550-16:2016Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter

ATIS 0600307:2014Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies, Ancillary Non-Metallic Apparatus, and Fire Spread Requirements for Wire and Cable

ATIS 0600319:2014Equipment Assemblies - Fire Propagation Risk Assessment Criteria

BDS EN ISO 10093:2003Plastics. Fire tests. Standard ignition sources.

BDS EN 1021-2:2014Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent

BDS EN 1021-1:2014Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette

BDS EN ISO 1043-4:1999/A1:2016Plastics. Symbols and abbreviated terms. Flame retardants

BDS EN ISO 10528:1998Textiles -- Commercial laundering procedure for textile fabrics prior to flammability testing

BDS EN 1101:1998Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame).

BDS EN 1101:1998/A1:2006Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame).

BDS EN 1102:2016Textiles and textile products. Burning behavior. Curtains and drapes. Detailed procedure to determine the flame spread of vertically oriented specimens.

BDS EN 1102:2016Textiles and textile products. Burning behavior. Curtains and drapes. Detailed procedure to determine the flame spread of vertically oriented specimens.

BDS EN 1103:2006Textiles. Fabrics for apparel. Detailed procedure to determine the burning behaviour.

BDS EN ISO 1182:2011Reaction to fire tests for products - Non-combustibility test

BDS EN ISO 11925-2:2011Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test.

BDS EN 12101-1:2006Smoke and heat control systems. Specification for smoke barriers

BDS EN 12101-1:2006/A1:2006Smoke and heat control systems. Specification for smoke barriers

BDS EN ISO 12138:2018Textiles -- Domestic laundering procedures for textile fabrics prior to flammability testing

BDS EN 12881-2:2005+A1:2009Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

BDS EN 12881-1:2014Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

BDS EN 12882:2015Conveyor belts for general purpose use. Electrical and flammability safety requirements.

BDS EN 12952-1:2015Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a smouldering cigarette

BDS EN ISO 12952-2:2010Textiles -- Assessment of the ignitability of bedding items -- Part 2: Ignition source: match-flame equivalent

BDS EN ISO 12952-1:2010Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette

ASTM E662 -19:2019
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

ASTM E800 - 14:2014
Standard Guide for Measurement of Gases Present or Generated During Fires

ASTM E84 - 20:2020
Standard Test Method for Surface Burning Characteristics of Building Materials

ASTM E906 / E906M - 17:2017
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

ASTM E970 - 17:2017
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ASTM F1534-16:2016
Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

ASTM F1550-16:2016
Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter

ATIS 0600307:2014
Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies, Ancillary Non-Metallic Apparatus, and Fire Spread Requirements for Wire and Cable

ATIS 0600319:2014
Equipment Assemblies - Fire Propagation Risk Assessment Criteria

BDS EN ISO 10093:2003
Plastics. Fire tests. Standard ignition sources.

BDS EN 1021-2:2014
Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent

BDS EN 1021-1:2014
Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette

BDS EN ISO 1043-4:1999/A1:2016
Plastics. Symbols and abbreviated terms. Flame retardants

BDS EN ISO 10528:1998
Textiles -- Commercial laundering procedure for textile fabrics prior to flammability testing

BDS EN 1101:1998
Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame).

BDS EN 1101:1998/A1:2006
Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame).

BDS EN 1102:2016
Textiles and textile products. Burning behavior. Curtains and drapes. Detailed procedure to determine the flame spread of vertically oriented specimens.

BDS EN 1102:2016
Textiles and textile products. Burning behavior. Curtains and drapes. Detailed procedure to determine the flame spread of vertically oriented specimens.

BDS EN 1103:2006
Textiles. Fabrics for apparel. Detailed procedure to determine the burning behaviour.

BDS EN ISO 1182:2011
Reaction to fire tests for products - Non-combustibility test

BDS EN ISO 11925-2:2011
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test.

BDS EN 12101-1:2006
Smoke and heat control systems. Specification for smoke barriers

BDS EN 12101-1:2006/A1:2006
Smoke and heat control systems. Specification for smoke barriers

BDS EN ISO 12138:2018
Textiles -- Domestic laundering procedures for textile fabrics prior to flammability testing

BDS EN 12881-2:2005+A1:2009
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

BDS EN 12881-1:2014
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

BDS EN 12882:2015
Conveyor belts for general purpose use. Electrical and flammability safety requirements.

BDS EN 12952-1:2015
Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a smouldering cigarette

BDS EN ISO 12952-2:2010
Textiles -- Assessment of the ignitability of bedding items -- Part 2: Ignition source: match-flame equivalent

BDS EN ISO 12952-1:2010
Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette